close
Maxiwatt
Maxiwatt Maxiwatt
Made to order 24-hour dispatch on-line shop

 

CoilHeater: Helical cartridges

CoilHeater: Helical cartridges

CoilHeater: Helical cartridges

CoilHeater: Helical cartridges

Adaptable

CoilHeater cartridges are the most recommended for heating cylinders and joints. These cartridges, despite their small diameter, have great heating power, distributing uniform heat at 360º.
The heater wire is of the highest quality with a thin outer layer of magnesium oxide and enclosed in a stainless steel cover. Everything goes through a process of compression, thereby giving longer life as well as reaching a temperature of 950ºC.
As an option the cartridge heater can be hermetically sealed to prevent the entry of extraneous materials, moisture, fluids, etc. Thermocopy is recommended for the best functioning of CoilHeater resistances.

  • Economic.
  • Uniform temperature.
  • Variety of endings.
Protecciones, Protections

IP65
Waterproof
(under request)

Stock prices 2.2 x 4.2

length heated length power W/cm2 2.2 x 4.2 price (*)
200 mm 135 mm 180 W 5.40 200CH2242 34.24 €
265 mm 200 mm 200 W 5.40 265CH2242 34.24 €
315 mm 250 mm 225 W 5.40 315CH2242 35.31 €
345 mm 280 mm 250 W 5.40 345CH2242 36.38 €
400 mm 335 mm 275 W 5.40 400CH2242 36.38 €
450 mm 385 mm 300 W 5.40 450CH2242 37.45 €
525 mm 460 mm 350 W 5.40 525CH2242 38.52 €
600 mm 535 mm 400 W 5.40 600CH2242 38.52 €
700 mm 635 mm 450 W 5.40 700CH2242 40.66 €
750 mm 685 mm 550 W 5.40 750CH2242 41.73 €
800 mm 735 mm 625 W 5.40 800CH2242 43.87 €
950 mm 885 mm 700 W 5.40 950CH2242 48.15 €
1000 mm 935 mm 750 W 5.40 1000CH2242 51.36 €
1175 mm 1110 mm 850 W 5.40 1175CH2242 56.71 €
1400 mm 1335 mm 1000 W 5.40 1400CH2242 60.99 €
1600 mm 1535 mm 1150 W 5.40 1600CH2242 66.34 €
1800 mm 1735 mm 1200 W 5.40 1800CH2242 69.55 €
2000 mm 1935 mm 1250 W 5.40 2000CH2242 70.62 €

(*) Include Thermocouple type "J", pure Fluoropolymer-Nickel-plated copper leads, and fibreglass protection sleeve of 1000mm.

More information

Coil-Heaters.com

Technical data

Heat intensity Not exceeding 10wcm2 (recommended)
Power Depends on the diameter
Current escape (when cold) <=0.1mA a 242 v.
Insulation (when cold) <=5mA. a 500v.
Dielectric strength 1500v. 1/seg
Working temperature 7 50ºG max.
Length tolerance +/-2.5%
Diameter tolerance +/- 0.1
Cut of connection tolerance +/-15 mm
Power (w) tolerance +/-10%
Cold Areas Depends on length. and diameter 5-15 mm

Helicowatt
  1. Welded watertight base tig, resists pressure up to 60kg/cm2.
  2. Stainless steel 304.
  3. Checked pure granulometric magnesium oxide.
  4. Nickel-chromium heater wire. Melting point 1400ºC.
  5. Conductor lead.
  6. Metal braided protection.
  7. Metal base adapter 25mm.
  8. Inactive area 65mm.
  9. Pressed tube for fastening.
  10. Refractive sheath.

The unique Maxiwatt manufacturing system, together with its electronic system, makes it possible to separate the spirals, thereby guaranteeing the same temperature around the whole perimeter and length of the cartridge. Obtaining an uniform and lasting temperature..

Use

When a temperature of 360ºC of a cylinder must to be accurate.

Applications

  • Extrusion point.
  • Leads tempering.

Endings: positioning of the conexions

Axial Output Ref. "Helico A" Tangential Output Ref. "Helico B"
CoilHeater CoilHeater
Lateral Output Ref. "Helico C" Radial Output Ref. "Helico D"
CoilHeater CoilHeater

 

Sales Conditions - - © 2010 - 2014 Resistencias Industriales Maxiwatt S.L.