Diameter from 4mm.
Maxiwatt cartridge heaters are most suitable for moderate heating up to a maximum temperature of 300ºC. Made with stainless steel tube of the finest quality. The heater wire is also of the highest quality, with a thin outer layer of magnesium oxide and enclosed in a stainless steel sheath. Everything goes through a process of compression so that longer life is achieved. The whole cartridge is sealed hermetically to prevent the entry of moisture, fluids, etc.
Maxiwatt cartridges can be manufactured by a special process for the moulding of the cartridge at the customer's request.
 Uniform temperature.
Safe when used.
Wide 24 hours permanent stock.
 Internal complements
Technical data
| |
| Heat intensity |
Not exceeding 10wcm2 (recomended) |
| Power |
Depends on the diameter |
| Working temperature |
350ºG max. |
| Tolerance of length |
+/-1.5% |
| Tolerance of diameter |
+/- 0.1 |
| Tolerancia corte de conex. |
+/-15 mlm |
| Power tolerance (w) |
+ 5 % - 10 % |
| Cold Areas minimum |
15 mlm. |
|
 |
- Welded watertight base Tig; withstands pressure up to 60kg/cm2.
- Calibrated stainless steel 304.
- Checked pure granolumetric magnesium oxide.
- Nickel-chronium 80/20 heater wire.
- Conductor lead.
|
| The unique Maxiwatt manufacturing system, together with its electronic system, makes it possible to separate the spirals, thereby guaranteeing the same temperature for the whole perimeter and length of the cartridge. Therefore, a uniform and lasting temperature is obtained. |
 |
Use
Microwatt cartridges are especially designed to transmit heat in areas of limited or specifc spaces. Due to their low tension of 48V. Max are particularly suitable when the heat has to be operated manually.
Applications
Cutting blades.
Heating of fluids.
Welding points.
Small marking, etc.
|
